diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 7f7eb05..edd0fbf 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -160,6 +160,7 @@
 #define SUNXI_GPC_SDC2		3
 #define SUN6I_GPC_SDC3		4
 #define SUN50I_GPC_SPI0		4
+#define SUNIV_GPC_SPI0		2
 
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c
index 910e805..734c165 100644
--- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
+++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -90,6 +90,7 @@
 
 #define SPI0_CLK_DIV_BY_2           0x1000
 #define SPI0_CLK_DIV_BY_4           0x1001
+#define SPI0_CLK_DIV_BY_32          0x100f
 
 /*****************************************************************************/
 
@@ -132,7 +133,8 @@
 	if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
 		return 0x05010000;
 
-	if (!is_sun6i_gen_spi())
+	if (!is_sun6i_gen_spi() ||
+	    IS_ENABLED(CONFIG_MACH_SUNIV))
 		return 0x01C05000;
 
 	return 0x01C68000;
@@ -156,11 +158,16 @@
 	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
 		setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));
 
-	/* Divide by 4 */
-	writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
-				  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
-	/* 24MHz from OSC24M */
-	writel((1 << 31), CCM_SPI0_CLK);
+	if (IS_ENABLED(CONFIG_MACH_SUNIV)) {
+		/* Divide by 32, clock source is AHB clock 200MHz */
+		writel(SPI0_CLK_DIV_BY_32, base + SUN6I_SPI0_CCTL);
+	} else {
+		/* Divide by 4 */
+		writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
+					  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
+		/* 24MHz from OSC24M */
+		writel((1 << 31), CCM_SPI0_CLK);
+	}
 
 	if (is_sun6i_gen_spi()) {
 		/* Enable SPI in the master mode and do a soft reset */
@@ -191,7 +198,8 @@
 					     SUN4I_CTL_ENABLE);
 
 	/* Disable the SPI0 clock */
-	writel(0, CCM_SPI0_CLK);
+	if (!IS_ENABLED(CONFIG_MACH_SUNIV))
+		writel(0, CCM_SPI0_CLK);
 
 	/* Close the SPI0 gate */
 	if (!IS_ENABLED(CONFIG_MACH_SUN50I_H6))
@@ -212,6 +220,8 @@
 	if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
 	    IS_ENABLED(CONFIG_MACH_SUN50I_H6))
 		pin_function = SUN50I_GPC_SPI0;
+	else if (IS_ENABLED(CONFIG_MACH_SUNIV))
+		pin_function = SUNIV_GPC_SPI0;
 
 	spi0_pinmux_setup(pin_function);
 	spi0_enable_clock();